Browse all practice questions for the Design and Manufacturing Lab (DML) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Design and Manufacturing Lab (DML) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Bringing 1:1 scale printed and trimmed sheetmetal templates to lab is recommended to expedite part fabrication.
  • When operating a lathe, where should the tool bit typically be positioned?
  • There is no such thing as a dumb question once you are hired and start working for a company.
  • Which items should be present in assembly BOMs created for this course?
  • Which option lists the two common methods of programming CNC machines?
  • Which item identifies a part with a unique name and/or number?
  • During design, should room for assembly tooling be considered?
  • Calculation of required fastener tightening torque depends on two variables. Which pair correctly identifies these variables?
  • How much radial clearance does a close fit hold for a 1/4 inch bolt?
  • In industry, what happens if we cant communicate effectively, design simple parts that can be easily manufactured, create decent part drawings, or read measuring instruments correctly?
  • When choosing between an off-the-shelf part and a custom part, which should generally be used?
  • If you must identify the weakest among billet, cast, and forged based on the given scores, which material is weakest?
  • Which statement about fasteners in BOMs is true?
  • In addition to drawings, whose feedback is valuable to simplify parts while maintaining function?
  • What should be used to remove chips from machines instead of using your hands?
  • Which thread specification is given for steel in the example?
  • Which of the following is not listed as a required item on a proper detail drawing?
  • What is the typical tolerance range for free hand flame/plasma cutting?
  • Which dimensioning mistake is associated with shading in views?
  • Forging is particularly suitable for which type of parts?
  • For mounting bracket using M6x1.0 fasteners in steel with precise tolerances, what clearance hole size would you specify?
  • To simplify achieving surface finishes, should you specify coarser or finer surface finishes?
  • Casting typically yields parts that are near net shape.
  • How is horsepower defined?
  • Fillet count?
  • Before turning on the milling machines and lathes, what range should they be in?
  • When reasonable, which hole type should be used?
  • In design sizing, should parts be made larger or smaller?
  • In relation to chamfers and fillets, should parts be designed with or without them?
  • Which practice reduces inventory variety?
  • For mounting bracket using M6x1.0 fasteners in aluminum with loose tolerances, what clearance hole size would you specify?
  • Which approach to tool size is recommended to ease manufacturing?
  • Which factor directly relates to material properties in determining cutting speed?
  • Before changing tools in the lathe, the spindle must be raised to its uppermost position.
  • Which thread specification is specified for aluminum?
  • Which of the following is NOT one of the three most common types of electric arc welding?
  • There is no such thing as a dumb question in this course.
  • Which item is not typically considered safety equipment for milling?
  • Before changing tools on the milling machine, which two actions should you perform on the spindles over the plastic table cover?
  • Which of the following is not among the listed factors affecting optimum cutting speed for drilling and milling?
  • In arc welding, which arc heats pieces of similar material to a temperature high enough to melt and coalesce?
  • Select the six factors that affect optimum cutting speed for drilling and milling.
  • Which process can weld virtually any conductive metal?
  • If a material's machinability refers to its ability to be easily machined to final shape, would stronger materials possess higher or lower machinability?
  • Which statement about sheetmetal is true regarding surface area to thickness ratio?
  • Never reach over the rotating part on the lathe due to the danger of protruding what?
  • What is the calculated spindle speed N before applying the 60% reduction in the given example?
  • Which item should be worn when handling sheet metal to ensure safety, except when using power tools?
  • Which items are required to bring every week to the lab and TA office hours?
  • What is the most important rule when using manual lathes?
  • For each part manufactured in the lab, what is required for part drawings?
  • Which material is explicitly permitted to be cut on the Marvel bandsaw?
  • During forging, the metal is typically in which state?
  • Fasteners are primarily designed to do what?
  • Which machines could be automated via CNC technology in the lab?
  • Which equation represents spindle speed N in terms of surface speed V and drill diameter D?
  • What completes the phrase in the design process step: 'gather information/ _____ research'?
  • Which of the following is a benefit of using 80/20 framing?
  • The speed range on the mills or lathes should be set before the machine is turned on.
  • Decision matrix objectives are weighted because not all objectives are of equal importance.
  • For raw stock removal, should you design parts for minimum or maximum removal?
  • Which of the following is an advantage of TIG welding?
  • Lathe, mill and drill press spindle speeds must be adjusted while the machines are OFF.
  • Which item is NOT one of the four steps of the listed design process?
  • When working with sheet metal, what should you wear, except when using power tools such as bandsaws, drill presses, grinders, and sanders?
  • Which is an advantage of press fits?
  • All sheetmetal parts are razor sharp after shearing and should therefore be deburred immediately after cutting.
  • One advantage of keyways and/or pin joints is that they always provide what?
  • Which statement about sheets and plates thickness is correct?
  • Fastener threads should always be loaded in which mode?
  • What material is the Marvel bandsaw allowed to cut?
  • On a lathe, where should the tool bit be positioned for normal cutting?
  • Every part you design or drawing you make from this point forward is a reflection of your intelligence and design capability.
  • Which statement correctly describes the documentation requirements for off-the-shelf parts (OTS) used in a project?
  • Which lathe component is primarily used to feed the cutting tool across the workpiece?
  • What is the primary difference between MIG and TIG welding?
  • Which practice is appropriate when securing a workpiece for milling?
  • According to lab procedures, when using raw materials in the lab, purchase orders must be submitted before use.
  • How should you engage the workpiece to avoid chipping the fragile cutting inserts and edges?
  • Which of the following should be checked before/when turning on milling machines?
  • Which rules apply when turning on the milling machine?
  • For holes intended for fasteners, which fit is typically used?
  • For the 1/2 inch drill bit, what is the unscaled feed rate in inches per minute before applying the 60% reduction?
  • Cutting sizes approach?
  • What should be done with parallels after clamping the workpiece in the vise?
  • Which of the following rules apply when using the milling machine?
  • Which item is used to specify the material to be used on a part?
  • Should you always design parts with room for assembly tools?
  • To minimize raw-stock removal, design parts for which level of removal?
  • Why are separate evaluation matrices created for separate functional subunits of a design?
  • Which parameter should be adjusted with the mills, lathes, and drill presses running?
  • Which of the following is not a common workholding method on a lathe?
  • Based on the over versus under tightening example, properly torqued fasteners can withstand how many more force application cycles before failure?
  • Which pairing is best for manufacturability?
  • Under what circumstance is it acceptable to leave the cutting tool or workpiece rotating when taking a measurement?
  • What is the limiting factor for how fast a drill or endmill can feed through any material?
  • Given a motor shaft speed of 150 rpm, a 6 inch diameter wheel and 75% efficiency, what is the linear velocity of the robot?
  • The suitability of parts for the forging process is independent of desired quantity.
  • What is a key outcome of forging for metal parts?
  • Is manufacturing time an example of a qualitative assessment?
  • What is the purpose and benefit of peck drilling?
  • Which components rotate on a lathe?
  • After creating a decision matrix, the concept with the highest overall value should always be selected for use in the final design.
  • To facilitate manufacturing, which approach to part tolerances is recommended?
  • Which items are required to be worn or brought to the lab each week?
  • Which statement is NOT a recommended practice when installing or removing tools on the milling machine?
  • What should you not pull off the machines using your hands; use a rag instead?
  • ECNs are used to formally track design changes and corrections through which phases?
  • When wiring the control box on subsequent occasions, what safety step is required?
  • Which type of drawing quality is emphasized to support easier manufacturing?
  • Which item would include the designer/ drawer's name?
  • What is the typical tolerance range for boring?
  • Define design for manufacturability (DFM).
  • This is the point in the semester when a serious accident is most likely to occur because of how easy it is to drop our guard and forget how dangerous the equipment can be if not used properly.
  • Which of the following is not a common component of an engine lathe?
  • To facilitate manufacturing, should you select stronger or weaker material?
  • Which is the most common workholding method on a milling machine?
  • For fastener threads, should they be placed in shear or tension?
  • Which statement is true about the threshold between sheet and plate?
  • What is the typical tolerance range associated with reaming?
  • Which type of parts are manual machines a better choice for?
  • Which option is NOT a feature that CNC machines possess to increase productivity?
  • Which thread size is specified for aluminum in the examples?
  • Which statement best describes the relationship between cutting speed and tool life in drilling and milling?
  • Which equipment is used to create bends in sheet metal?
  • What is the function of a vise in milling?
  • Which statement best reflects proper initial wiring of the control box?
  • CNC machines always require less time to make a part than manual machines.
  • What is the typical tolerance range for turning and milling?
  • For slots or pockets in traditional manufacturing, which corner geometry is easier to machine?
  • Casting is good for which type of parts?
  • Preparing for the Tapped Hole Quiz is listed as a recommended activity.
  • Which statement about the headstock on a lathe is true?
  • For design, should parts be made to use larger or smaller cutting tools to ease manufacturing?
  • Which two actions should you perform on the milling machine spindles before changing tools?
  • If you must choose between fasteners and pins for locating parts, which is the typical choice?
  • To reduce complexity, should you specify fewer or more finished surfaces?
  • Which statement describes a characteristic that makes casting suitable for mass production?
  • Which machine in the lab is not listed as CNC-automatable?
  • Which of the following statements about chuck keys is correct?
  • Which tool size choice reduces setup complexity?
  • Which action is recommended when connecting to motors for the first time?
  • Rank the four common torque-transmission methods from strongest to weakest.
  • Casting is good for which production scenario?
  • A vital part of your success as a design engineer is to realize what an enormous resource those with more design and manufacturing experience can be to your professional development.
  • In the steel example, which UNF thread is specified?
  • Regarding chamfers and fillets, what guideline aligns with simplifying manufacturing?
  • Which UNF thread is provided as an option for steel in the example?
  • Which dimensioning mistake involves omitting tolerances for any dimension?
  • The lathe chuck key should be removed from the chuck after clamping the tool securely.
  • When changing spindle speeds on the milling machine, must the spindle be running?
  • What is the recommended mindset regarding experienced colleagues in professional development?
  • What is the typical tolerance range for bandsaw cutting, sheetmetal shearing, and sheetmetal bending?
  • To minimize tooling changes, which approach is preferred?
  • When specifying slots or pockets for traditional manufacturing equipment, which corner is preferred?
  • Compared to casting and billets, forged metal is known for which characteristics?
  • Milling is typically used to generate which type of surfaces?
  • True or False: Once the spindle completely stops, it is still dangerous to remove cutting chips by hand.
  • The cross slide on a lathe primarily moves the cutting tool in which direction relative to the spindle axis?
  • Which set lists the four steps of the design process?
  • True or False: The best manufacturing shops emphasize that parts should be easy to manufacture by using proven DFM techniques, clear drawings, and by listening to supplier feedback.
  • For holes that pass completely through the part, which hole type is recommended?
  • Which item provides additional information about breaking sharp edges?
  • Decision matrices are used to unbiasedly evaluate different ideas based on a weighted set of objectives the design team decides are important for solving the problem.
  • Which item should be specified for surface finishing on every surface?
  • Which of the following is an advantage of MIG welding?
  • In the velocity example, what drivetrain efficiency was assumed?
  • It is acceptable to leave a machine running in which scenario?
  • For the 1/4-28 thread in steel, which option is the correct tap drill size from the data provided?
  • Before changing the lathe between HI and LOW range you must ask for TA help.
  • What is the radial clearance value for a close fit on a 1/4 inch bolt as given?
  • As a waste-reduction strategy, you should only cut the shortest over-size pieces to the necessary lengths.
  • Which statement about weighting objectives in a decision matrix is true?
  • To simplify production, which surface finish is recommended?
  • Which practice is unsafe while the milling machine is in operation?
  • Which unit is used for the final velocity in the velocity example?
  • Which of the following is a type of milling machine commonly used in shops?
  • Summarize the relationship between (minimum) achievable dimensional tolerance and part size.
  • Which item should be removed from the lathe chuck to avoid danger?
  • Which hole type is recommended for through-bolting clearance to ease assembly?
  • CNC machines are better suited than manual machines for which types of parts?
  • Which statement about MIG welding is true?
  • What is the structural benefit of bending sheetmetal edges or flanges?
  • Summarize the relationship between relative production time and feature surface finish.
  • How should engineers select materials to meet strength and manufacturability requirements?
  • Torque vs speed curves for electric motors are which shape?
  • What is a recommended method for locating parts relative to each other?
  • Define the casting process.
  • In milling, what influences the maximum safe depth per pass?
  • Which UNC thread is specified for aluminum in the example?
  • Heavy/ light cuts will use lower cutting speeds. Which type of cuts uses the lower speeds?
  • In the spindle speed calculation for a 1/2 inch HSS drill bit in mild steel on a manual milling machine, what value of surface speed (SFM) is used?
  • Which option is NOT a listed drawback of CNC machining centers?
  • When cutting stronger materials you will use lower cutting speed. Which material condition requires lower speeds?
  • Which statement best describes the forging process?
  • Turning is primarily used to generate which type of surface?
  • If someone doesn't understand how each part of your design works, what should happen?
  • Rank the following materials by strength: billet metal, cast metal, forged metal (4 weakest to 10 strongest).
  • If any fasteners do not freely thread together by hand, which action should you take to prevent damage to expensive components?
  • In casting, the suitability of parts is independent of the desired quantity.
  • Which hole type is preferred for ease of assembly in the provided context: tapped holes or thru-bolted holes?
  • Whose name should appear on a detailed drawing as the designer/ drawer?
  • What is the process called to remove sharp edges from a cut workpiece?
  • The lab's brake is used for what operation?
  • Mirror image parts?
  • To ease manufacturing, should you use larger feature tolerances or smaller feature tolerances?
  • Which statement best describes relay control compared to proportional control?
  • What is the primary purpose of a design matrix in this course?
  • Which practice aligns with making parts easier to manufacture by reducing material removal?
  • In the velocity example, what wheel diameter was used?
  • Which thickness defines plates?
  • When designing parts for cutting tools, which L:D ratio is preferred?
  • Which bottom shape is preferred for holes?
  • What does ECN stand for in product development?
  • To maximize tool life, you will use lower cutting speeds. Which statement best describes this relationship?
  • When cutting flexible workpieces compared with rigid workpieces, which of the following cutting speeds should you generally use?
  • Which of the following should a proper detail drawing include?
  • Which capability is used to create holes in sheet metal?
  • What is the typical tolerance range for drilling?
  • In a milling setup, which components typically rotate?
  • Which of the following is NOT among the three things you should check before/when turning on milling machines?
  • What keeps a bolted joint tight?
  • Which welding process uses a tungsten electrode to conduct electricity and provide the heat source?
  • Which equation governs maximum peripheral tool velocity as a function of tool size?
  • Which action is a recommended practice for groups aiming for project success?
  • What is the purpose of tolerances in engineering drawings?
  • Safety glasses must be worn any time you are in the shop, including during TA hours.
  • What is the typical tolerance range for free hand grinding?
  • Which practice helps demonstrate that parts will be easier to manufacture relative to competitors?
  • Which action is recommended when someone makes excuses for not completing their work?
  • What is the limiting factor for how fast a drill or endmill can rotate in a particular material?
  • When connecting the control box to the motors for the first time, what must you do?
  • Is it advisable to use mirror-image parts in a design?
  • When specifying hole bottoms, which is typically chosen for ease of manufacturing and seating?
  • Which dimension convention should be used?
  • Which sheetmetal capability is NOT listed as a capability in the lab?
  • CNC technology is particularly advantageous for which scenario?
  • Which of the following is dangerous to wear when operating powered equipment?
  • Which dimension convention is preferred to avoid arbitrary size decisions?
  • What are principal benefits of allocating individual member tasks via a works schedule?
  • Which statement best describes UNC and UNF thread forms?
  • Which statement is NOT among the three most common sheetmetal operations as listed?
  • Which practice should be followed when dealing with sharp edges after sheetmetal shearing?
  • Which statement is true about keeping objects away from the milling cutting zone while the spindle is running?
  • Should parts that can be bought off the shelf be designed to do so?
  • When scaling the part size to aid manufacturing, which action is recommended?
  • Before changing spindle directions on a lathe, what is required?
  • Which of the following is a consideration when designing motor hubs?
  • Spindle speeds on the lathe, mill and drill press should be adjusted while the machines are OFF.
  • What is the easiest mistake to make when changing tools on milling machines?
  • What does OTS stand for in manufacturing terminology?
  • Most lab motor fasteners are metric and should be obtained by telling the TAs what size you need.
  • Which two items are the two common methods of programming CNC machines?
  • What are the three most common types of electric arc welding?
  • Which of the following is a design mistake that can make a part look poorly designed?
  • What is the maximum material removal per pass permissible on a mill or lathe?
  • Select the appropriate tap drill size for tapping a 1/4-28 thread in steel.
  • In MIG welding, how is filler wire supplied to the weld pool?
  • The presence and efficiency of cutting fluid is listed as a factor affecting optimum cutting speed. True or false?
  • What information is required to properly denote fasteners in assembly BOMs?
  • What is the feed rate after applying the 60% reduction?
  • What is the term called for the arrangement using D-shaped shafts with small flats cut into them and set screws?
  • Which statement about lathe safety is NOT a correct practice?
  • Dissimilar metals can be joined using the arc welding process if the proper filler metal is used.
  • Tool size preference?
  • Is it acceptable to temporarily leave dial calipers and parallels out of their storage boxes while working on the equipment in the shop?
  • Which is a dimensioning mistake that causes confusion?
  • What item should never be left in the lathe chuck?
  • Drawings quality?
  • The electrode used in MIG welding is consumed as the weld is made.
  • Gearing can be used to increase motor torque at the expense of what?
  • Which action illustrates best practice when initiating contact with the workpiece on the milling machine?
  • Milling is a metal cutting process used primarily for the generation of cylindrical surfaces.
  • Which statement about the tool post on a lathe is true?
  • What rotates on a milling machine?
  • What is a stated safety requirement when working in the shop?
  • What is the limiting factor for how deep to cut (per pass) with an endmill in a particular material (assuming sufficient flute length)?
  • To simplify inspection, should you specify fewer or more dimension datums?
  • What is the thread pitch for a 10-32 fastener?
  • What is the purpose of flux or shielding gas in welding?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy